Packaging machine KOMBI-DP
Packaging machine KOMBI-DP is used for Doy-Pack packing for different products. The machine completely works in an automatic mode. The bag is formed from the roll material according to the size installed on a clean film.
The machine is made of stainless steel and has a multi-level control system based on HLM controller Mitsubishi.
The machine automatically is stopped at the end or breakage of the packaging material or the product, if any parameters (sealing temperature and cooling of the product, mechanism failure, etc.) exceed their normal operating range.
To get a pasteurized product, hot filling is used, as well as doypack bag thermal processing under the temperature 130°C.
- main drive with stepless speed control;
- electronic speed display on the touch panel;
- operation speed control;
- built-in counter for working hours, bags produced per one shift and a non clearable since the production
- built-in vacuum ejector;
- discharge conveyor with polyurethane belt;
- rotating control panel
- built-in control panel
- programmable controller with sensor control panel
- connection to СIP – washing;
- set of spare parts and tool of operator
- «doy-pack» system
- feeding system for weigher caps
- piston weigher with control system for drop formation
- level sensor placed in the weigher hopper
- built-in cooling system
- anti germicidal ultraviolet processing of the material.
Information is for reference only. For more details please contact our sales managers.
|Packaging material type||PЕS/PЕ, РЕТ/AL/PE, and others by agreement|
|Packaging material thickness||60-140 mkm|
|Bag height (excluding the cap height)||140-280 mm|
|Bag width||85-210 mm|
|Dose size||200-500 ml|
|Operation speed||to 50 doses/min|
|Pneumatic power supply||0,6 mРa , no more than 520 l./min|
|Electric power supply||5 pole, 380V 50Hz up to 5.2 kW.|
|Dimensions (LxWxH)||5560x1320x1950 (not including the weigher height)|
Technical parameters are for reference only. For more details please contact our sales managers.