COVID-19, OUR COMPANY STILL WORKING ACCORDING TO THE USUAL SCHEDULE
Request a consultation
Mon - Fri - 9:00 a.m.-17:30 p.m. Sat., Sun. - closed
Great Britain +44 7520 64 26 44
South Africa +27 875 51 06 68
E-MAIL:      info@ele-mash.com
Universal cutting machine (herb cutter) MUR-100
Universal cutting machine (herb cutter) MUR-100
Universal cutting machine (herb cutter) MUR-100
Universal cutting machine (herb cutter) MUR-100
Universal cutting machine (herb cutter) MUR-100

Universal cutting machine (herb cutter) MUR-100 is designated for grinding and milling herbs, flowers, caulis, roots of medicinal plants. The machine is well suited for wood bark grinding, as well as for medicinal mushroom (i.e. fungus) grinding. More...
Video








Send an enquiry

Description

Technical parameters

Video

Universal cutting machine (herb cutter) MUR-100 is designated for grinding and milling herbs, flowers, caulis, roots of medicinal plants. The machine is well suited for wood bark grinding, as well as for medicinal mushroom (i.e. fungus) grinding. The machine consists of cutting and milling module. The cutting module is used for coarse preliminary grinding by blades spirally placed and rotating on shaft. Product grinding occurs when the cutting blades pass through two fixed racks. Pre-cut ​​or crushed product is pushed into the grinding module, where the process of final grinding occurs. The required fraction is given by installing the perforated metal sieve. Also the sieve cells from 0.8 mm to 15 mm can be used. You should consult with the manufacturer to select grinding fractions. Product feed into the machine is carried out by the operator through the input tray. The grinded product is poured into fabric filter bag fastened under the machine table.

Information:

The grinding fraction depends on the size of installed sieves, rotor rotation speed, as well as raw material humidity.

According to circular sieve size, you can calculate a medium size of the received product using the value 0,7. For example, the sieve hole is 4mm, the received product will be 4 х 0,7 = 2,8 mm.

Rotor rotation speed is a value inversely proportional to the grinding fraction and capacity. For example, the higher the speed, the more performance and less grinding faction will be, but the amount of dust will be higher.

Humidity affects the amount of dust. In the case of over-dried raw material, the amount of dust is increased.


Information is for reference only. For more details please contact our sales managers.


Model MUR-100
Capacity to 100 kg/h
Drive power 5,5-7,5 kW
Power supply 380V / 50Hz, 3 phases
Protection class IP 54
Hopper volume 25 dm3
Width x length 1575 x 940 mm
Height 1520 mm
Weight 370 (380 kg)
Operating mode discontinuous
Maintenance 1 operator
   
Technical parameters are for reference only. For more details please contact our sales managers.



Please submit your application on our web-site or contact our sales managers directly for the order.

Description Technical parameters Video
in Great Britain: +44 7520 64 26 44   e-mail: info@ele-mash.com