Corundum stone mills, serie MUK

Corundum stone mills MUK are designed for grinding crystalline products (sugar, salt, fructose, etc.). Available capacity is from 100 to 2000 kg./hr. These mills are characterized by a simple construction, high reliability and practicality of use. In comparison with other machines they have the highest lifetime before general maintenance. Grinding fraction and capacity are directly dependent on the product supply regulated by a baffle, and they may differ from the operation manual data depending on the required quality of grinding.

The mill consists of the following main parts: table, motor, protection cover, drive, body frame, rotor, stator, hopper, baffle, cover, bag mount belt, collector drum.

The mill is made partially and entirely of stainless steel.

Operating principle of the mill as follows: the product is grinded between rotating rotor with inserted corundum fingers and static stator; also the crystals can be mutually impacted. The rotor rotates at high speed (up to 11,000rpm). The bearer of the grinded particles is air. Air is also a cooling medium for the grinded product. Through the charge hole in the hopper the product enters into the working area of ​​the mill, where, due to the high speed rotation of the rotor the grinding process happens. The charge hole in the hopper can be covered with a baffle. The stator is mounted to the cover. Rotor rotation is carried out by means of a belt drive and motor with the bearing couple. The motor is mounted to the swing frame. Belt drive tension adjustment is carried out by the adjusting screw. The drive mounted to the body, and the rotor is mounted to the drive. The belt drive is overlapped with the cover. All parts and details are mounted to the worktable. The grinded product enters through the hole in the table under air pressure, after that it falls into the collecting bag fixed by the belt.